Use; Switching On And Off; Selecting The Suction Power Level; Carpet Protective Function - Miele Triflex HX1R Operating Instructions Manual

Use

Switching on and off

 If you have charged the battery in the
wall bracket, take the vacuum cleaner
out of the wall bracket.
 If you have charged the battery dir-
ectly, unplug the charger from the
charging socket on the bottom of the
battery.
For the best possible cleaning results,
always activate the ComfortClean
function before switching on the va-
cuum cleaner (see "Maintenance – Ac-
tivating the ComfortClean function").
 Press the On/Off switch on the Com-
fort handle .
28
Selecting the suction power
level
The suction power level can be adjus-
ted for the specific situation. Reducing
the suction power reduces the amount
of effort required to manoeuvre the
Electrobrush.
There are 3 power levels to choose from
on the Comfort handle:
Min. Lowest power level for light
soiling
Eco Medium power level for nor-
mal soiling
Max. Highest power level for
heavy soiling
The floor covering detection function is
activated at every power level.
The Electrobrush power consumption is
automatically set to the optimum level
based on the type of flooring – this can
lead to a change in the operating noise.

Carpet protective function

When the vacuum is at a standstill, the
power of the Electrobrush is reduced
automatically after a few seconds, to
protect the floor surface.

Illuminating the work area

(depending on model)
The Electrobrush on your vacuum
cleaner is equipped with BrilliantLight to
illuminate the work area.