Preparing for use
Connecting the handle to the
suction tube
^ Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
^ Press the release button (arrow) if
you want to separate the parts and
pull the handle out of the suction tube
with a slight twist.
Adjusting the telescopic wand
The telescopic wand is made of two
parts with one part being fitted within
the other. This enables height
adjustments for comfortable vacuum
cleaning.
^ Press the telescopic wand release
button (see arrow) to release the
tubes and adjust to the required
height.
Fitting the standard floorhead
^ Push the telescopic wand into the
floorhead and turn it clockwise or
anti-clockwise until it clicks into
position.
^ To release the floorhead from the
telescopic wand, press the locking
button (see arrow) and pull the
telescopic wand away from the
floorhead.
12