Table of Contents
Advertisement
Selecting the suction power level
The suction power level can be
adjusted for the specific situation.
Reducing the suction power reduces
the amount of effort required to
manoeuvre the Electrobrush.
There are 3 power levels to choose from
on the Comfort handle:
Min.
Lowest power level for light
soiling
Eco
Medium power level for
normal soiling
Max.
Highest power level for
heavy soiling
The floor covering detection function is
activated at every power level.
The Electrobrush power consumption is
automatically set to the optimum level
based on the type of flooring and roller
brush used – this can lead to a change
in the operating noise.
Carpet protective function
When the vacuum is at a standstill, the
power of the Electrobrush is reduced
automatically after a few seconds, to
protect the floor surface.
Illuminating the work area
(depending on model)
The Electrobrush on your vacuum
cleaner is equipped with BrilliantLight to
illuminate the work area.
Self-standing function for short
pauses in vacuuming
(For safety reasons, this function can
only be used when the PowerUnit is
fitted at the bottom of the vacuum
cleaner)
If you are vacuuming with the
PowerUnit fitted at the bottom of the
vacuum cleaner, you can easily
interrupt operation while the appliance
is switched on.
Swing the vacuum cleaner forwards
until the Electrobrush connector
audibly clicks into place.
The vacuum cleaner stays securely
upright, the Electrobrush switches itself
off and the battery is conserved.
If you then unlock the connector on the
Electrobrush, the Electrobrush will
switch on again.
Maintenance
Risk of injury caused by rotating
roller brush.
You can injure yourself on the
rotating roller brush.
Switch the vacuum cleaner off before
doing any maintenance work. Use
the On/Off switch on the Comfort
handle to do this.
29
Advertisement
Chapters
Table of Contents
