Samsung SVR-1650E User Manual page 87

SUBNET MASK : Input the [SUBNET MASK] address obtained from the internet service
company of the user.
GATEWAY : Input the [GATEWAY] address obtained from the internet service company of
the user.
DNS : Input the [DNS] address obtained from the internet service company of the user.
PORT : [PORT] assigned when connecting to a computer can be changed. If port is changed in
the DVR, When the network setup is changed, it takes time to setup the network module again.
Connect after 1~2 minutes. Port number can be setup depending on network conditions
(firewall etc.).
DEFAULT PORT : 4000
SWR : If the product is connected to a cable modem or a xDSL modem, IP address will
change each time connection to ISP (User's communicaton company server) is attempted. In this
case, the user will not know the changed IP address. If a product using a floating IP is
registered on the SWR server, the changed IP can be found when attempting connection with
the product. To register an IP address on the SWR, setup [SWR] item to ON. Changed IP
address can be verified from FUNCTION-STATUS (SYSTEM INFORMATION 2).
Internet
MAC Address and IP
Selected DVR
SWR
DVR registers MAC
address and float
IP address in SWR.
SVR-1650E/1640E/1640A/950EUser Manual
MAC Address and IP
MAC Address
DVR Manager
DVR Manager access to SWR
and obtain IP address of
DVR.
IP
DVR
Users (DVR Manager) access to SWR
and obtain IP address of DVR.
5
ISP
Administrator/
User
85