Ferroli XIGNAL CE Technical Information Installation And Service Instructions page 31

Regulating the hot water temperature
Press key once.
Set the temperature of the hot water to the required value between 40 and 65°C using the right-hand keys
. It is unadvisable to exceed a temperature of 50°C.
Also remember that, when multiplied by the water flow rate per minute and for 60 minutes, the product
of the temperature difference between the D.H.W. output and input in the boiler cannot exceed the
effective rating of the boiler itself.
Hot water temperature and flow rate display
Press key twice. The flow rate will appear on the lower left-hand side of the display with the temperature
on the right.
CONTROL TEMP.
°
D.H.W.: 50 C
FLOW D.H.W. TEMP.
°
13 L./M. 50 C
31