Dodge 2015 Journey Owner's Manual page 95

center child restraint will block the seat belt buckle for
this position.
WARNING!
• Use anchorages B and C to install a LATCH-
compatible child restraint in the center seating
position (2). Do not install a LATCH-compatible
child restraint using anchorages C and D. This is
not a LATCH-compatible position in your vehicle.
• A child restraint installed in the center position (2)
will block the seat belt buckle for the empty right
outboard seating position (1). Do not use this seat
for another occupant.
• Never use the same lower anchorage to attach more
than one child restraint.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93
• If you are installing three child restraints next to
each other, you must use the seat belt and the center
tether anchor for the center position. You can then
use either the LATCH anchors or the vehicle's seat
belt for installing the child seats in the outboard
positions. Please refer to "Installing the LATCH-
Compatible Child Restraint System" for typical
installation instructions.
Always follow the directions of the child restraint manu-
facturer when installing your child restraint. Not all child
restraint systems will be installed as described here.
To Install A LATCH-Compatible Child Restraint
1. If the selected seating position has a Switchable Auto-
matic Locking Retractor (ALR) seat belt, stow the seat
(Continued)
belt following the instructions below. See the section
I n f o r ma t i o n P r o v i d e d b y :
WARNING! (Continued)
2