Dodge 2015 Journey Owner's Manual page 332

330 UNDERSTANDING YOUR INSTRUMENT PANEL
equipped), power sunroof (if equipped), and power
outlets will remain active for up to 10 minutes after the
ignition is cycled to OFF. Opening either front door will
cancel this feature. To change the Engine Off Power
Delay status, press the "0 seconds," "45 seconds," "5
minutes" or "10 minutes" button on the touchscreen.
Then press the back arrow button on the touchscreen.
Compass Settings
• Variance
Press the Variance button on the touchscreen to change
this display. Compass Variance is the difference between
Magnetic North and Geographic North. To compensate
for the differences, the variance should be set for the zone
where the vehicle is driven, per the zone map. Once
properly set, the compass will automatically compensate
for the differences, and provide the most accurate com-
pass heading.
NOTE: Keep magnetic materials away from the top of the
instrument panel, such as iPod's, Mobile Phones, Lap-
tops and Radar Detectors. This is where the compass
module is located, and it can cause interference with the
compass sensor, and it may give false readings.
Compass Variance Map
I n f o r ma t i o n P r o v i d e d b y :