Dodge 2015 Journey Owner's Manual page 528

Table of Contents

Advertisement

526 WHAT TO DO IN EMERGENCIES
Tire And Wheel Cover Or Center Cap
1 — Valve Stem
2 — Valve Notch
3 — Wheel Lug Nut
3. Align the valve notch in the wheel cover with the
valve stem on the wheel. Install the cover by hand,
4 — Wheel Cover
5 — Mounting Stud
I n f o r ma t i o n P r o v i d e d b y :
snapping the cover over the two lug nuts. Do not use
a hammer or excessive force to install the cover.
4. Install the remaining lug nuts with the cone shaped
end of the nut toward the wheel. Lightly tighten the
lug nuts.
WARNING!
To avoid the risk of forcing the vehicle off the jack,
do not tighten the lug nuts fully until the vehicle has
been lowered. Failure to follow this warning may
result in personal injury.
5. Lower the vehicle to the ground by turning the jack
handle counterclockwise.
6. Finish tightening the lug nuts. Push down on the
wrench while at the end of the handle for increased
leverage. Tighten the lug nuts in a star pattern until
each nut has been tightened twice. For the correct lug

Advertisement

Table of Contents
loading

This manual is also suitable for:

Journey 2015

Table of Contents