Machine Storage - Bissell CleanView Proheat 53U6 series User Manual

M
aintenance and care
Machine care continued
5a. Remove the white filter by grasping the post
and pulling up and out of the unit. Rinse the
filter under cold water. NOTE: Be careful
not to drop the filter into the sink or
disposal.
5b. Replace the white filter back into the filter
area. NOTE: Make sure the white fil-
ter is seated properly before replac-
ing the red solution filter cap.
5c. Replace the red solution filter cap
and turn clockwise to tighten.
6. Replace the 2-in-1 water tank on
the machine.
7. Any loose hair or debris can be pulled from
the brush roll and thrown away.
8. To clean attachments, remove from hose
and rinse in clean, running water. Dry
before storing. Clean the hose by suction-
ing clean water from the tap. Before wrap-
ping back on machine, lift end of hose and
stretch out to ensure all water is cleared
from hose. Refer to page 13.
9. Wipe the machine's exterior with a soft cloth.
10. After carpet is dry, vacuum again to remove
hair and fuzz
Machine storage
Put the unit away in a closet or basement for
the next use. Store cleaner in a protected, dry
area. Since this product uses water, it must not
be stored where there is a danger of freezing.
Freezing will damage internal components and
void the warranty.
w w w . b i s s e l l . c o m
5a.
15