Care, Maintenance & Storage; Machine Storage - Bissell COMPACT 48X4 User Manual

D
Care,
Maintenance & Storage
D-1 Machine storage
For best results, a few simple steps can
assure your machine is well maintained after
your cleaning is complete.
1. Wrap power cord around Quick Release
Cord Wrap™ on side of machine.
2. Wipe all surfaces with a soft cloth. Store
cleaner upright in a protected, dry area.
NOTE: You may have cleaning solution
remaining in the formula and water tank.
You may store your machine this way for
the next cleaning task, but never keep dirty
water in the dirty tank.
To reduce the risk of electric shock, turn power
switch off and disconnect plug from electrical
outlet before performing maintenance or
troubleshooting checks.
Do not store unit where freezing may occur.
Damage to internal components may result.
8
www.BISSELL.com
D-2 Install the replacement
brush belt
1. Turn machine off and unplug from
wall outlet.
2. Remove formula and water and dirty tanks.
3. Lay machine down to access bottom
of the machine.
4. With a Phillips head screwdriver, unscrew
belt cover and remove.
5. Remove brush end cap and remove
belt from brush.
6. Brush can now be removed.
7. Belt can be removed by sliding off
motor pulley.
8. Clean or replace belt. Attach belt to
motor pulley and brush, insert brush into
right side end cap.
9. Reattach the left end cap and slide brush
back into place.
10. Replace belt cover and screw into place.
11. Manually rotate brush to make sure it
rotates freely and that belt is aligned properly.