Sony PFM-510A1WU Service Manual page 9

Precautions
Precautions
On safety
• Operate the unit on 100 to 120 V AC or 220 to 240
V AC.
• The nameplate indicating operating voltage, power
consumption, etc. is located on the rear.
• Should any solid object or liquid fall into the cabinet,
unplug the unit and have it checked by qualified
personnel before operating it any further.
• Unplug the unit from the wall outlet if it is not to be
used for several days or more.
• To disconnect the AC power cord, pull it out by
grasping the plug. Never pull the cord itself.
• When the unit is installed on the floor, be sure to use
the retractable feet.
On installation
• Allow adequate air circulation to prevent internal
heat build-up. Do not place the unit on surfaces
(rugs, blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation holes.
• Do not install the unit in a location near heat sources
such as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical vibration
or shock.
• When you install multiple equipment with the unit,
the following, such as Remote Commander's
malfunction, noisy picture, noisy sound, may occur
depending on the position of the unit and other
equipment.
On PDP (Plasma Display Panel)
• There may be some tiny black points and/or bright
points on the PDP. These points are normal.
• Do not display a same still image on the screen for
long, consecutive time. Otherwise, the afterimage
may appear on a part of a panel. Use the screen saver
eventually to equalize the screen display.
On cleaning
To keep the unit looking brand-new, periodically
clean it with a mild detergent solution. Never use
strong solvents such as thinner or benzine, or abrasive
cleansers since these will damage the cabinet. As a
safety precaution, unplug the unit before cleaning it.
4
(GB)
On repacking
Do not throw away the carton and packing materials.
They make an ideal container in which to transport the
unit. When shipping the unit to another location,
repack it as illustrated on the carton.
If you have any questions about this unit, contact your
authorized Sony dealer.
Features
The PFM-510A1W series are 16:9 42-inch flat panel
monitor adopting the PDP (Plasma Display Panel) and
accepts various types of signals with the built-in scan
converter.
Improved image quality
The PDP achieves higher image quality with 1024 ×
1024 lines. This makes for finely-detailed HDTV and
PC images.
You can get greater brightness and contrast over
conventional monitors.
Internal high-performance scan converter
The monitor has a high performance scan converter.
Using a unique algorithm, the monitor processes
signals in a wide range of formats – Video, HDTV,
PC, etc.
Flexibility
An option slot is in place for future expansion.
The slot-in option adapter allows for quick and easy
system upgrades.
Warning on power connection
Use a proper power cord for your local power supply.
United States, Continental
Canada Europe
Plug type VM0033B COX-07 636
Female end VM0113 COX-02 VM0310B VM0303B
Cord type SJT H05VV-F
Minimum cord set rating 13A/125V 10A/250V
Safety approval UL/CSA VDE
.........................................................................................................................................................................................................
1) Windows95/98 is a registered trademark of the Microsoft Corporation.
Features
Other features
• Three sets of video inputs with audio inputs: one
composite video or Y/C inputs, one RGB input, and
one RGB/component input.
• Displays the HDTV signal with tri-level sync signal.
• Three dimensional comb filter for NTSC Y/C
separation.
• Line correlation comb filter for PAL Y/C separation.
• Automatic input signal detection with indication.
• Windows95/98 1) PnP (Plug and Play) compatible.
• Picture AGC function — this function automatically
adjusts and improves the contrast when a low
intensity signal is input.
• On-screen menu for various adjustments and settings
• On-screen display in five languages for user-friendly
access.
• Fine adjustment of image size and position
• Memory function for storage of up to five picture
settings.
• ID control
• Self-diagnosis function.
• Remote (RS-232C) connector (mini DIN 8-pin)
• Control-S connector
• Accepts infrared or wired Sony Remote
Commanders using SIRCS code.
• Vertical setup
United Kingdom, Ireland, Japan
Australia, New Zealand
— VM1296
VM1313
CEE (13) 53rd (O.C) HVCTF
10A/250V 10A/125V
VDE DENTORI
5
(GB)