Sony PFM-510A1WU Service Manual page 38

MEMORY RESET
PIC CONTROL
W/B ADJUST
PIC SIZE
CONFIG
STATUS
3-2
CANCEL
USER DATA
CANCEL
ALL EEPROM
SUB CONTRAST
SUB CHROMA
SUB PHASE
COMB-F Y
COMPONENT BY
COMPONENT Y
COMPONENT RY
RED D.GAIN
GREEN D.GAIN
BLUE D.GAIN
RGB A.GAIN
RED A.GAIN
GREEN A.GAIN
COLOR TEMP
H SIZE
H SHIFT
V SIZE
V SHIFT
ASPECT
SUB BRIGHT
ENHANCE
H FILTER
CLAMP PHASE
V SYNCHRO
RGB2 TYPE
PANEL TEMP1
PANEL TEMP2
DC 160 V
DC 60 V
P/S TEMP
FAN STATUS
EXECUTE Reset all the data adjusted by user
to initial setting.
EXECUTE
Reset all the contents of EEPROM
to standard values.
Adjust the level of analog circuits.
For an adjusting method, see 3-3.
For these 7 items, 8 kinds of independent adjustments
by input system are made as listed in Table 3-3.
Adjust white balance using A/D converter and
digital gamma circuit. For an adjusting method, see 3-5.
For 3 A.GAIN items, 8 kinds of independent
adjustments by input system, and for D.GAIN ,
two kinds of adjustment are made as listed in Table 3-3.
Refer to 3.
For these items, 12 kinds of independent adjustments
by input signal are made as listed in Table 3-1.
Normally, adjustment is not necessary. Refer to 4.
Set common factors and special functions.
Refer to 5.
Internal status of the set can be confirmed.
Refer to 6.
Refer to 1.
Refer to 2.
PFM-510A1WU/PFM-510A1WE