Code Alarm ca5554 PROFESSIONAL SERIES Installation Manual page 25

8 - Gas / Diesel: Selects engine type and delay time for the starter output wire during
remote start activation.
Gas - Gasoline engine, no delay for the starter output wire.
10 Second Delay - Diesel engine, delays the starter output wire for 10
seconds after the ignition has been powered up by the remote start.
15 Second Delay - Diesel engine, delays the starter output wire for 15
seconds after the ignition has been powered up by the remote start.
20 Second Delay - Diesel engine, delays the starter output wire for 20
seconds after the ignition has been powered up by the remote start.
45 Second Delay - Diesel engine, delays the starter output wire for 45
seconds after the ignition has been powered up by the remote start.
9 - Single / Double Pulse Start: Switches the remote start activation between a
single or double press from the transmitter.
10 - IGN 2 Output: Programmable high current output.
Ignition 2 - Ignition output during remote start.
Accessory - Accessory output during remote start.
Start / Crank - Crank output during remote start.
11 - 2 or 3 Hour Start: Not available on this model.
12 - Turbo Timer: Not available on this model.
13 - Transmission Mode: Select the type of remote start activation based on the
vehicle's transmission type.
Automatic - For use with automatic transmission vehicles. Standard remote
start operation.
Manual - For use with manual transmission vehicles. Remote start ready mode
must be set upon exit of vehicle to enable remote start.
14 - Temperature Start: Sets the threshold temperature for temperature start mode.
When temperature start is activated, the remote start function will activate when the
ambient temperature drops below the selected temperature.
2014 Voxx Electronics Corporation. All rights reserved. 25