4.
Install the cover.
5.
Follow the procedures in After Working Inside Your Computer.
Removing the Power Switch
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove the:
•
cover
•
bezel
3.
Follow the steps to remove the power switch:
a. Disconnect the power-switch cable from the system board [1].
b. Un-thread the power-switch cable from the metal retention clip [2].
c. Remove the power button by pressing on the two latches and pulling it out from the slot [3,4].
Installing the Power Switch
1.
Insert the power-switch cable through the front of the computer.
2.
Push the power button into its slot and press it in, until it snaps into place.
3.
Route the power-switch cable through the metal clip.
4.
Connect the power-switch cable to the system board.
5.
Install the:
•
bezel
•
cover
6.
Follow the procedures in After Working Inside Your Computer.
18