24
Connecting the battery
Risk of electrical shock!
Always verify the charging device is disconnected from the 230 V AC
outlet when connecting to a battery..
▪
Always ensure the area around the battery is well ventilated during the charging
process.
1. Connect the positive charging clamp (red) to the positive battery terminal
(marked P or +).
2. Connect the negative charging clamp (black) to the body of the vehicle, or in
exceptions to the negative battery terminal (marked N or -).
3. Verify both terminal clamps make good contact with the respective terminals.
4. Plug the power plug into a suitable AC mains outlet
In the event of reverse polarity the "Polarity" LED will light up red.
Charging will not start.
Product overview AG 1208, AG 1210, AG 1212
7
6
9
8
1
2
3
4
5