Disabling Stream And Record Buttons On The Monarch Hd Device; Enabling Multi-Device Control - Matrox Monarch HD User Manual

50
Disabling Stream and Record buttons on the
Monarch HD device
You can disable the physical Stream and Record buttons on the Monarch HD
device to prevent someone from inadvertently stopping a streaming or recording
session. This option only applies to the Monarch HD you are connected to, and
not other Monarch HD devices you may be controlling.
° To disable the Stream and Record buttons:
In the Command Center, click Control .
1
For more information, see
Select Disable Stream and Record buttons on this Monarch HD
2
device
The Stream and Record buttons on the Monarch HD device are disabled.
¦ Note This button disable feature is off by default and, when required, would
also need to be performed after a factory reset.

Enabling multi-device control

This section details how to enable multi-device control of up to four other devices
in the Command Center (see
devices on the same network"
In the Command Center, click Control .
1
2 Select Control multiple Monarch HD devices .
For each Monarch HD device that you want to control, enter the network IP
3
address
the device can be found on the network. For information on acquiring a
Monarch HD's IP address, see
page 16.
Activate or deactivate the control for a Monarch HD device by selecting or
4
clearing the device's Active box.
Chapter 5, Streaming and Recording
"Accessing the Command Center"
.
"Control streaming and recording for multiple
on page 48).
of the device. Click Scan after entering the IP address to verify if
"Network connection and IP address"
on page 19.
on