Viewing The Monarch Hd Status; Accessing The Status Page; Monarch Hd Errors - Matrox Monarch HD User Manual

44

Viewing the Monarch HD status

The Status page in the Command Center provides a summary of the Monarch
HD status and settings, as well as any logged errors. This page can be viewed
without logging in.

Accessing the Status page

To access the Status page, open the Monarch HD Command Center (see
"Accessing the Command Center"

Monarch HD errors

When a streaming or recording error occurs, the
Monarch HD device. Unless you receive a pop-up error when using the buttons in
the Command Center's Control page (see
page 49), the error will be logged in the Messages section of the Status page.
¦ Note An error will not be reported if the audio connected to Monarch HD's
analog audio input is lost or missing. If this occurs, the stream and/or recording
continues but will not contain audio.
Viewing and clearing errors
Streaming and recording errors that don't appear as a pop up error on the
Control
The Status page displays the errors pertaining to that Monarch HD device only.
To monitor streaming and/or recording when controlling multiple devices (see
"Control streaming and recording for multiple devices on the same network"
page 48), we recommend that you open the Command Center for each Monarch
Chapter 4, Specifying Settings and Using the Command Center
page are instantly logged in the Messages section of the Status page.
on page 19), and then click Status .
LED illuminates on the
"Command Center Control page" on
on