Setting The Ip Mode - Matrox Monarch HD User Manual

For added security, you can restrict write access to the folder to one device
by adding the IP address of the Monarch HD that you want to use to write to
the folder. For example, if the IP address of the Monarch HD device is
169.254.1.11, type the following command:
echo /Users/Matrox/Desktop/Files 169.254.1.11 -mapall=$(logname)| sudo
tee /etc/exports
Press
5
ENTER
Type your user account password, and then press
6
Type the following command:
7
sudo nfsd restart
Press
8
ENTER
Close the Terminal window.
9

Setting the IP mode

The IP Setup page in the Command Center lets you switch the Monarch HD IP
mode between DHCP and Static. By default, Monarch HD is set to DHCP mode.
¡ Important Changing the IP mode will end the current Command Center
session. To access the Monarch HD Command Center again, you'll need to enter
a different Monarch HD IP address in your browser's address field. If switching
to Static mode, you may also be required to change your computer's network
configuration. For information on obtaining the Monarch HD IP address and
accessing the Command Center in DHCP or Static mode, see
"Network Connection and
.
.
Setup."
.
ENTER
Chapter 3,
Setting the IP mode
41