Specifying Record Settings; Accessing The Record Settings - Matrox Monarch HD User Manual

Hide thumbs Also See for Monarch HD:
Table of Contents

Advertisement

XML file contains encoding information, those settings will not be loaded.
Click Clear to remove the loaded streaming XML file.
¡ Important Please note the following:
If the stream name, username, or password is included in the stream URL,
$
do not enter the information in the respective text boxes.
Streaming XML files are not the same as Monarch HD configuration
$
XML files.
If your Flash-based server or CDN uses the "ModuleRTMPAuthenticate"
3
method for RTMP authentication, a username and password is used for
authentication, however, username and password information is not included
as part of the stream URL or streaming XML file. In this case, you must
enter the stream Username and Password in the text boxes provided.
Start streaming the Monarch HD input source to a CDN or media server as
4
detailed in

Specifying record settings

The Record Settings page in the Command Center lets you set the record
settings for the Monarch HD device. Monarch HD provides settings for recording
your input source for video on demand (VOD), high-quality editing, and
archiving/previewing purposes. Content can be recorded to MOV and MP4 file
formats on a FAT32 or NTFS file system. Because FAT32 limits the recording
file size to 4 GB, you must use an NTFS drive if your recorded file will be greater
than 4 GB. If controlling multiple devices, each device on the network records
based on its own record settings. For details on how to start/stop recording, see
Chapter 5, "Streaming and
For approximate recording file sizes based on the average video data rate and
recording duration, and approximate maximum file durations given the average
video data rate and available disk space, see
on page 39.
¡ Important To save changes made in the Record Settings page, you must
click the Apply button. If you leave the Record Settings page before applying
the settings, all changes will be lost.

Accessing the record settings

To access the record settings, open the Monarch HD Command Center (see
"Accessing the Command Center"
Record
.
Chapter 5, "Streaming and
Recording."
on page 19), and then choose Settings >
Recording."
"Recording file sizes and duration"
Specifying record settings
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents