Table of Contents
Advertisement
2) Pressing the M Button again displays the average
of all awake hours.
3) Pressing M Button once again shows the average
of all night hours.
All individual readings can be viewed by repeatedly pressing
*
the M Button.
The display of BP reading and memory of Ambulatory Mode
*
can be disabled via software setting.
27
In «Home» mode
1) When the M Button is pressed, it briefly displays
the total number of measurements stored, e.g.
N=20.
«A» is displayed when
*
the number shown is
the average of all data.
«- -» will display when the
*
number of measurements
is less than 12.
Advertisement
Table of Contents
