Event - IQ CCTV IQR1920D4 User Manual

IQCCTV
Ø Load Setting: Load the parameters in the U flash disk to device. After loading successfully,
the system will auto restart.
Ø Save Setting: Save the parameters of device to a flash disk.
Note:
1. Do not take out the USB memory or break the power during the update
2. When the update is done, the system will be automatically restarted
3. Please manually recovery ex-factory default after system rebooting
4. It will be available only when DVR return back to Preview mode and no any operation.
Click [Main menuàAdvancedàEvent] to enter into the <Event> interface as shown below.
1. Event Type: Three abnormal types: Disk No Space, Disk Error and Video Loss.
2. Enable: Activate abnormal alarm.
3. Alarm out: Select [Enable] or [Disable]
4. Latchtime: Set how long the buzzer will sound when external sensor alarm is detected
(10s,20,40s,60s)
5. Show Message: Change the message that shows on the screen when sensor alarm is
detected.
5.3.6.4

Event

IQ1920DVR User Manual
42