IQR16D 16 Camera DVR with Real Time HD1 Recording and Mobile/Internet Access User Manual TECHNICAL SUPPORT: For Technical Support please contact your local distributor. LIMITED WARRANTY: This product is supplied with a 1 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear.
Page 2
IQCCTV IQR16D – 16 Camera DVR Notes: The power supply of this DVR is provided through DC12V5A adapter, please check the power outlet before installation and ensure it can meet the requirements of the adapter. Do not place the DVR at a place subject to rain and moisture.
IQCCTV IQR16D – 16 Camera DVR Contents Chapter 1 Open-case inspection and quick installation ........4 1.1 Open-case inspection....................4 1.1.1 Notes ......................4 1.1.2 Package and accessories ................4 1.2 Product Apperance ....................4 Chapter 2 Software interface basic operation ............. 5 2.1 Power on and login ....................
Page 4
IQCCTV IQR16D – 16 Camera DVR 2.9.3 Playback and download ................21 2.10 Client end and playing software ................22 2.10.1 Client ......................22 2.10.2 Playing software ..................23 2.11 Central Management Software(CMS) ..............24...
IQCCTV IQR16D – 16 Camera DVR Chapter 1 - Open-case inspection and quick installation 1.1 Open-case inspection 1.1.1 Notes please firstly check if not damaged during transportation and check if the accessories are complete. 1.1.2 Package and accessories Following parts are included in the package: ...
IQCCTV IQR16D – 16 Camera DVR Chapter 2 - Software interface basic operation 2.1 Power on and login When the DVR is powered on, the system enters the preview status. If there is video input, the corresponding channel will display monitoring video on the main interfacce.
IQCCTV IQR16D – 16 Camera DVR 2.2 Main menu 2.2.1 Shortcut menu Right click the mouse, and shortcut menu pops up: [Main menu]: System main menu interface [Single screen]: Click to enter the corresponding channel and display single screen ...
IQCCTV IQR16D – 16 Camera DVR 2.2.2 Main menu Click mouse right button and select the main menu, main menu interface of DVR system pops up as below: [Record]: “Basic” including resolution, quality, frame rate, pre-Record setup; “Advanced” including overwrite, overlay; “Recording schedule”: set the recording types of every period every day.
IQCCTV IQR16D – 16 Camera DVR 2.3 Recording setup 2.3.1 Basic [Main menu] > [Record], enter the basic setup Interface: [Video Channel]: the channel you want to setup [Resolution]: CIF, Half-D1 and D1 [Quality]: Recording quality is divided into lowest, low, normal, high, and highest quality.
IQCCTV IQR16D – 16 Camera DVR 2.3.2 Advanced [Overwrite]: Selecting Auto; when the capacity of HDD is full, the new recording file will overwrite the earliest recording file. If selecting Off; it will not record if there is insufficient space.
IQCCTV IQR16D – 16 Camera DVR 2.4 Recording playback and backup 2.4.1 Recording playback Select [Record Search] from shortcut menu or Main menu and enter the interface, with two types of Search; by type or by time. By Type: with 5 options; All, Manual, Timer, Alarm, Timer & Alarm. Select the type that you want to search in the drop-down box, and choose from the recording list (as shown in the image below).
IQCCTV IQR16D – 16 Camera DVR 2.4.2 Recording backup In the " file list" (image above) , select the recording file to backup. If selecting single file backup, the interface (as shown below) will pop up. For multiple files backup, select multiple files and click “multiple files backup”.
IQCCTV IQR16D – 16 Camera DVR 2.5 Alarm setup 2.5.1 Alarm port connection figure The alarm terminal input block, loacted at the back of the DVR (shown below): Alarm In: Alarm Channel: Choose the alarm channel Sensor Type: Depending on your alarm you can select either ‘Normal Open’ or ‘Normal Close’.
IQCCTV IQR16D – 16 Camera DVR 2.5.2 Motion Detection The setup method of motion detection is the same as the setup of ‘Alarm-In’. Sensitivity refers to the motion detection sensitivity which can be set when the recording mode is motion detection or motion detection & alarm recording.
IQCCTV IQR16D – 16 Camera DVR 2.6 PTZ setup 2.6.1 Channel setup Enter from the Main menu to Channel setup: [Video channel]: Select the relevant channel. [Channel Name]: Enter the channel name. English characters, digits and special characters can be entered.
IQCCTV IQR16D – 16 Camera DVR 2.6.2 PTZ Control Right-click to enter the preview screen and select "PTZ control" in the pop-up shortcut menu, and enter the PTZ control interface (below): Directional buttons are used to control the moving direction of dome.
IQCCTV IQR16D – 16 Camera DVR 2.7 Network 2.7.1 Basic Enter from the Main menu to Network setup. Network setup is divided into Basic setup and Advanced setup. Basic setup interface mainly includes network access mode, IP address, subnet mask, gateway address and other parameters, as shown below: ...
IQCCTV IQR16D – 16 Camera DVR 2.7.2 Advanced [Minor stream]: Set image quality and frame speed. When the network is not good, the secondary stream can reduce the image quality and frame rate and open by default. [Email]:Support email alarm when an event is triggered, DVR system will automatically intercept the pictures when an event is triggered and then send it to the specified mailbox to prompt the users.
IQCCTV IQR16D – 16 Camera DVR 2.8 Mobile phone surveillance 2.8.1 DVR End setup First select the "Network" in the "Mobile" to enter mobile phone monitoring interface and set the port. The port range is 1024-65535. 2.8.2 Mobile Phone end operation Taking the iPhone for example, run the iPhone’s APP Store program, search for...
IQCCTV IQR16D – 16 Camera DVR 2.9 IE end login 2.9.1 IE Controls download and installation Firstly, add the IP address of DVR to the system’s Trusted sites. Open the browser, select “Internet Options” on the “Tool” list and then operate as below: 1.
IQCCTV IQR16D – 16 Camera DVR 2.9.2 IE end login After setting the Trusted sites, reboot the browser and install the plug-in units as prompted. After installation, the login interface is shown as below. Enter the login port number, user name, password, and selected language, click "OK" and then remote access to DVR is available.
IQCCTV IQR16D – 16 Camera DVR 2.9.3 Playback and download Click LIVE and enter the playback interface as below: Search: Select Video search by type, the video file list will display with two options of Video search by time and by type.
IQCCTV IQR16D – 16 Camera DVR 2.10 Client end and playing software 2.10.1 Client end installation & running Open the software provided: Once opened the following interface will be shown: DVR Addr: DVR’s IP address Use Domain: When selected, enter the domain name in the DVR address bar ...
IQCCTV IQR16D – 16 Camera DVR 2.10.2 Playing software The video adopts H.264 compression format, so special playing software is needed. Open the player file "player.exe"( ) in the CD, as shown below:...
IQCCTV IQR16D – 16 Camera DVR 2.11 Central Management Software (CMS) This system supports connction to DVR through Internet, not through the support of an intermediate server. It is convenient for user’s management. Software installation: Double click to run CD file “DVRC MS. msi”, and finish as prompted.
Page 26
IQCCTV IQR16D – 16 Camera DVR System configuration Lock Add DVR Del DVR Playback configuration DVR list PTZ control Recording Screen split Capture Stop video Volume In the CMS, there are the following options: adding DVR, live preview, video playback, system setup, advanced setup, PTZ control and other functions.