Record Set; Record Parameters; Schedule - IQ CCTV IQR1920D4 User Manual

IQCCTV

5.3.2 Record set

Click [Main menuàRecordàRecord Para] to enter into the interface shown in the image 5-7
below.
Ø Channel: Setup the channel desired.
Ø Record: Set up the record status. Enable/Disable of each channel
Ø Pack Duration: Indicates the maximum continuous record time (15, 30, 45 and 60 min).
Click the [Main MenuàRecordàSchedule] to enter into the interface as shown below.
The [Channel] option allows the user to select any desired channel.
To setup weekly schedules, check the box of the record status you want (Alarm, General, or No
Record) and then click on each box in the schedule time line that you want. Click the [Copy – To]
pull-down menus and Copy button to copy settings from one day to any other day.

5.3.2.1 Record parameters

Picture 5-7

5.3.2.2 Schedule

IQ1920DVR User Manual
21