Oki ES3640E User Manual page 66

NO FEATURE
5 Lighter/Darker
6 Colour Mode
7 Simplex/
Duplex
Simplex/
Duplex
(Duplex
Layout)
NOTE
If you specify Auto for Tray Selection, the MFP automatically
selects the tray (from Trays 1 to 4) that can supply the most
appropriate paper. To print on paper from the MPTray, specify
MPTray for Tray Selection. If your copy is produced on paper
you did not expect to be used, specify the appropriate tray
manually and retry. In Copy Mode, there are limitations on the
combination of Media Type, Media Weight and Paper Size. For
information on paper size combinations, refer to
– Media support information" on page
OPTIONS
Auto, -5 to +5 by 1
Color, B&W
1to1 Sided, 1to2 Sided,
2to1 Sided, 2to2 Sided,
Top/Top, Top/Bottom
ES3640e MFP User's Guide> 66
DESCRIPTION
Allows you to adjust the
brightness levels for
scanning and printing.
This is not applied
(disabled) if Auto
Exposure is set to ON.
Allows you to select the
colour mode of the
output. If Color is
selected, scanned
image is printed in full
colour (Image
Type=24bit colour).
If B&W is selected,
scanned image is
printed in 8-bit
grayscale. No colour
settings are applied.
Allows you to specify
the original document
image layout and the
desired printed
document image layout.
If you specify 2to1Sided
or 2to2 Sided, set your
original documents on
the ADF.
Allows you to define the
orientation of the front
and back sides of a
duplex page (for
scanning and printing).
"Appendix D
179.