Printer Unit - Oki ES3640E User Manual

Hide thumbs Also See for ES3640E:
Table of Contents

Advertisement

>
CD3 – User's Guides
Contains documentation in electronic form (for example,
the User's Guide and Printing Guide) to describe how to use
the MFP for day-to-day tasks.
P
RINTER UNIT
P
APER RECOMMENDATIONS
Your printer unit will handle a variety of print media, including a
range of paper weights and sizes, transparencies and envelopes.
This section provides general advice on choice of media, and
explains how to use each type.
The best performance will be obtained when using standard
weight 75 – 90g/m² paper designed for use in copiers and laser
printers. Suitable types are:
>
Arjo Wiggins Colour Solutions 90g/m²
>
Colour Copy by Neusiedler
Use of heavily embossed or very rough textured paper is not
recommended.
Pre-printed stationery can be used, but the ink must not offset
when exposed to the high fuser temperatures used in the printing
process.
Envelopes should be free from twist, curl or other deformations.
They should also be of the rectangular flap type, with glue that
remains intact when subjected to hot roll pressure fusing used in
this type of printer. Window envelopes are not suitable.
Transparencies should be of the type designed for use in
copiers and laser printers. In particular, avoid office
transparencies designed for use by hand with marker pens.
These will melt in the fuser and cause damage.
Labels should also be of the type recommended for use in
copiers and laser printers, in which the base carrier page is
entirely covered by labels. Other types of label stock may
damage the printer due to the labels peeling off during the
printing process. Suitable types are:
>
Avery White Laser Label types 7162, 7664, 7666 (A4), or
5161 (Letter)
ES3640e MFP User's Guide> 29

Advertisement

Table of Contents
loading

Table of Contents