Motorola Symbol DS6707 Product Reference Manual page 292

11 - 32 Symbol DS6707 Digital Imager Scanner Product Reference Guide
Setup Field(s) Definitions (Continued)
Table 11-2
Parameter
Move Cursor to Last
Occurrence of String and
Replace All
Skip to End
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Move Cursor
Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning
a bar code from the Alphanumeric Keyboard on page 11-93.
NOTE If there is no match and the rule fails, the next rule is checked.
Move Cursor To Character
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan Move Cursor to Last Occurrence of String and
Replace All, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Keyboard. Scan the End of Message bar code on page 11-102. Enter
another alphanumeric string representing the character(s) (up to 10) to
insert using the Alphanumeric
Scan Skip to End to move cursor to the end of the data.
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. Set
these values using the prefix/suffix values in
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
Description
Alphanumeric
Keyboard. Scan End of Message.
Table 8-4 on page
Move Cursor To Start
Page
11-33
11-33
11-34
11-35
11-35
8-21.