Transmit Code 39 Check Digit
Parameter # 2Bh
Scan a bar code below to transmit Code 39 data with or without the check digit.
Transmit Code 39 Check Digit (Enable)
(01h)
NOTE Code 39 Check Digit Verification must be enabled for this parameter to function.
Code 39 Full ASCII Conversion
Parameter # 11h
Code 39 Full ASCII is a variant of Code 39 which pairs characters to encode the full ASCII character set. To enable
or disable Code 39 Full ASCII, scan the appropriate bar code below.
Enable Code 39 Full ASCII
(01h)
NOTE You cannot enable Trioptic Code 39 and Code 39 Full ASCII simultaneously.
Code 39 Full ASCII to Full ASCII Correlation is host-dependent. See the ASCII Character Set for USB on
page 7-15 or the ASCII Character Set for RS-232 on page 8-21 for more information.
*
Do Not Transmit Code 39 Check Digit (Disable)
(00h)
*
Disable Code 39 Full ASCII
(00h)
Symbologies 10 - 37