Winterizing The Freshwater System - Maxum 2500SCR Owner's Manual

Table of Contents

Advertisement

24
CHAPTER 6: PLUMBING
Observe the following about the freshwater system:
• Turn off the water pump when the boat is not in use or the water tank is empty.
• Inspect and clean the water filter often (located on the water pump).
• When your boat is to be left unattended for long periods of time, pump the water tank dry to prevent stored water
from becoming stagnant and distasteful.
• If the freshwater system needs to be disinfected, ask your dealer about treatments available for your boat's system.

Winterizing the Freshwater System

F
1. Drain the freshwater tank (A) by removing the stem fitting (B) at the fitting on the water tank.
2. Detach the water line (C) from the filter side of the freshwater pump (D).
3. Blow air (30 to 40 PSI) through this line.
4. Detach the remaining water line (E) from the freshwater pump.
5. Open the drain valve (F) on the water heater (G).
6. Close the drain valve after the all of the water has drained out of the water heater.
7. Starting with the faucet furthest away from the water pump (galley faucet) open ALL of the faucets.
8. Blow air (30 to 40 PSI) into the freshwater line (C) until the lines are free of water.
9. Hold the pedal down on the vacu-flush toilet (if equipped) to drain the water from the toilet.
10. Reassemble the freshwater system.
G
A
B
E
D
C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents