Specifications; Audio Section; Video Section - Denon AVR-3311CI Service Manual

TECHNICAL SPECIFICATIONS s
n Audio Section
• Power amplifier
Rated output :
Front : 125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Center : 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround : 125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Surround back / Front height / Front wide :
125 W + 125 W (8 Ω, 20 Hz – 20 kHz with 0.05 % T.H.D.)
165 W + 165 W (6 Ω, 1 kHz with 0.7 % T.H.D.)
Dynamic power : 130 W x 2ch (8 Ω)
190 W x 2ch (4 Ω)
Output connectors : 6 – 16 Ω
• Analog
Input sensitivity/Input impedance : 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 102 dB (IHF–A weighted, DIRECT mode)
Distortion: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
n Video Section
• Standard video connectors
Input/output level and impedance : 1 Vp-p, 75 Ω
Frequency response : 5 Hz – 10 MHz — +1, –3 dB
• Color component video connector
Input/output level and impedance :
Frequency response : 5 Hz – 60 MHz — +0, –3 dB (when "Video
Convert" set to "OFF")
DIMENSION
Y (brightness) signal — 1 Vp-p, 75 Ω
P / C signal — 0.7 Vp-p, 75 Ω
B B
P / C signal — 0.7 Vp-p, 75 Ω
R R
34.5 85 35.5
n HD Radio section
[FM](Note: μV at 75 Ω, 0 dBf = 1 x 10
Receiving Range :
[FM] 87.5 MHz – 107.9 MHz
Usable Sensitivity :
[FM]1.5 μV (14.8 dBf)
S/N (IHF-A) :
[FM]MONO 78 dB
STEREO 68 dB
HD 85 dB
Total harmonic Distortion (at 1 kHz) :
[FM]MONO 0.1 %
STEREO 0.2 %
HD 0.02 %
n Tuner section
(for E2, E1C)
[FM](Note: μV at 75 Ω, 0 dBf = 1 x 10
Receiving Range :
[FM] 87.5 MHz – 108.0 MHz
Usable Sensitivity :
[FM]1.2 μV (12.8 dBf)
50 dB Quieting Sensitivity :
[FM]MONO 2.0 μV (17.3 dBf)
STEREO 42 μV (34.5 dBf)
S/N (IHF-A) :
[FM]MONO 72 dB
STEREO 67 dB
Total harmonic Distortion (at 1 kHz) :
[FM]MONO 0.3 %
STEREO 0.7 %
n General
Power supply : AC 120 V, 60 Hz (for E3)
AC 230 V, 50 Hz (for E2)
AC 220 V, 50 Hz (for E1C)
Power consumption :
670 W
0.1 W (Standby)
2.2 W (CEC standby)
Maximum external dimensions :
434 (W) x 171 (H) x 381 (D) mm (17-3/32" x 6-47/64" x 15")
Weight : 12.2 kg (26 lbs 14.3 oz)
n Remote Control Unit (RC-1146)
Batteries : R6/AA Type (two batteries)
Maximum external dimensions :
53 (W) x 224 (H) x 28 (D) mm (2-3/32" x 8-13/16" x 1-7/64")
Weight : 160 g (5.6 oz, including batteries)
n Remote Control Unit (RC-1148)
Batteries : R03/AAA Type (two batteries)
Maximum external dimensions :
49 (W) x 220 (H) x 24.5 (D) mm (1-59/64" x 8-21/32" x 31/32")
Maximum external dimensions :
114 g (Approx 4 oz, including batteries)
344
434
4
(for E3)
–15 W)
[AM]530 kHz – 1710 kHz
[AM]20 μV
[AM]
85 dB
[AM]
0.02 %
–15 W)
[AM]522 kHz – 1611 kHz
[AM]18 μV