GE Merlin Installation And Maintenance Manual page 25

DIMENSIONS
Performance Specifications
Permeate Flow Rate
3
TDS Rejection (NaCl)
Minimum and Maximum Operating Conditions
Condition
Inlet Pressure
Inlet Temperature
Inlet TDS
Inlet Hardness
Inlet Chlorine
Inlet Iron
Inlet Manganese
Inlet pH
Inlet Turbidity
1. Based on 50 psi (3.44 bar), 77°F (25°C), 750 mg/L NaCl, 23.7% Recovery
2. System is designed for use on potable water systems only.
3. Specifications based on GE Osmonics testing data. For complete WQA test results to ANSI/NSF 58 standard,
see the Merlin Performance Data Sheet P/N 1263717.
DIMENSIONS
1 2
,
Minimum
0.33 gals/min (1.25 Lpm)
90%
Minimum
40 psi (2.76 bar)
40°F (4.44°C)
50 mg/L
0 mg/L (0 grain)
0 mg/L
0 mg/L
0 mg/L
4
0
Maximum
0.75 gals/min (2.84 Lpm)
99%
Average
0.50 gals/min (1.89 Lpm)
93%
Maximum
80 psi (5.52 bar)
100°F (37.78°C)
2,000 mg/L
171 mg/L (10 grain)
1.0 mg/L
0.1 mg/L
0.05 mg/L
10
1 NTU
25
Rev D