Change Call Rate - Cisco TelePresence EX60 User Manual

20 Call Rate

Change Call Rate

This can be done
before you call
someone only.
Tap More
( ) to gain
access to the options, as
outlined.
Tap Call Rate,
as outlined.
Change the call rate
by moving the slider,
as outlined.
About Call Rate
Call rate is the term used to express
the amount of bandwidth allocated
to the call and is measured in kbps
(kilobits per second).
The higher the call rate is, the
better the quality will be, but on
the expense of higher bandwidth
consumption.
The system comes with a default
call rate. This is set by your video
support team as a part of the
Administrator Settings (password
protected).
Why would you like to temporarily
change this setting? In most cases
you will use it to avoid choking
the video call when you try to call
someone at a higher rate than their
system and connection support.
Call rate cannot be changed during
a call, but you may change it just
before you place a call, as outlined
here.
D1501610 User Guide Cisco TelePresence
EX60 and EX90
Produced: July 2014 for TC7.2
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.