Change Call Rate; About Call Rate - Cisco DX70 User Manual

Video Calls

Change Call Rate

1
Tap the Call button (not shown), then locate
the entry whose call rate you want to alter
(not shown). Tap this entry to produce the Call
menu and then tap the More (...) icon below
the green Call button, as shown.
3
Move the slider to the required setting.
D1510418 User Guide
Cisco TelePresence DX70, DX80
Produced: June 2017 for CE9.0
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
2
Tap Custom call.
4
Tap the green Call button to place the call.
17

About Call Rate

Call rate is the term used to express
the amount of bandwidth allocated
to the call and is measured in kbps
(kilobits per second).
The higher the call rate is, the better
the quality will be, but on the expense
of higher bandwidth consumption.
The system comes with a default call
rate. This is set by your video support
team as a part of the Administrator
Settings (password protected).
Why would you like to temporarily
change this setting? In most cases
you will use it to avoid choking
the video call when you try to call
someone at a higher rate than their
system and connection actually
support.
Call rate cannot be changed during a
call, but you may change it just before
you place a call, as shown here.