Administrator Settings-Set Date And Time - Cisco TelePresence EX60 User Manual

64 Settings
Administrator Settings—Set Date and Time
About Time Setting
This window lets you specify your
preferred date and time formats, as
well as the time zone.
If you set the Date and Time Mode
to Auto (as has been done in this
example), the system will look for an
NTP server and get date and time
from there.
If you choose to set NTP mode to
Manual (as has been done in this
example), you must specify the NTP
server address to make things work.
D1501610 User Guide Cisco TelePresence
EX60 and EX90
Produced: July 2014 for TC7.2
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.