Specifications - Compex ReadyLINK DS2216 Quick Install Manual

4. Specifications

•
Industry Standards
•
Interface
•
LED Indicators
•
Speed Selection
•
Link Distance
•
Forwarding Method
•
Dynamic Address
Learning/ Filtering
•
Power Supply
•
Environment
Requirements
•
MAC Address
Table
4 Compex 16-Port All 10/100 Switch
Complies with IEEE802.3 10Base-T standard,
IEEE802.3u 100Base-TX standard, FCC Class A,
CE Mark.
Supports 16 10/100 Mbps ports (RJ-45, UTP):
Half/Full Duplex modes at 10 Mbps and 100
Mbps.
LED indicators for system Power, Link, Speed
(10/100Mbps), Duplex status, priority, trunking
and Port (Transmit/ Receive) traffic.
N-way Auto-negotiation or Forced Mode.
•
100Base-TX: Requires data grade (Category
5) UTP cable. Segment length can be up to a
maximum of 100 meters on every port.
•
10Base-T: Requires (Category 3, 4 and 5)
UTP cable. Segment length can be up to a
maximum of 100 meters on every port.
Store-and-Forward.
Yes.
Internal power supply is provided with voltage
ratings of 100VAC to 250VAC, 47~63 Hz.
Operating Temperature:
Storage Temperature:
Operating Humidity:
Storage Humidity:
[RH = Relative Humidity]
16K
DS2216
0°C to 50°C
-20°C to 70°C
10% to 80% RH
5% to 90% RH
English