Compex ReadyLINK DS2216 Quick Install Manual page 15

2b.
Press the Set button once and it will cycle to the next port. Port #1 will
light up first. Press the Set button again will jump to next port #2. Press
several times until the desired port LED lights up.
To set this port, press the Set button and hold it down for about 3
seconds until all ports LEDs flash once. When successful, this port
LED will turn OFF.
Setup complete.
100M LED Half LED
ON ON
OFF ON
ON OFF
OFF OFF
Table 1: Force Port Speed and Duplex mode
English Compex 16-Port All 10/100 Switch
Port Status
Forced to 100Mbps speed and Half-Duplex
mode
Forced to 10Mbps speed and Half-Duplex
mode
Forced to 100Mbps speed and Full-Duplex
mode
Reset to normal auto-negotiation mode
DS2216
11