How To Enter Programming Mode; Verifying The Software Version - Panasonic DBS 576 Technical Manual

Introduction to DBS 576 Programming
Introduction

How to Enter Programming Mode

Press the following on any display phone:
0
System
(where " NNNN" is the Dealer Programming ID Code -- " 9999" by default)
Configuration
Or, if no Dealer Programming ID Code is set, press the following on the phone at the
first digital port:
FF1
System
FF2

Verifying the Software Version

Trunks
When you enter Programming Mode (see above), the system will automatically
display the software version on the 2nd line of the display phone' s LCD.
FF3
Extensions
Verifying the
FF4
FF-/Soft Keys
To Verify an Extension Port:
If you already know the Extension Number (0-9999) assignment:
FF5
Groups
FF6
To Verify a Trunk Port:
TRS/ARS
If you already know the Trunk Number (1-576) assignment:
FF7
Applications
FF8
Or: Program the appropriate Feature Code into an FF-key:
Maintenance
Or: Enter the programming address for
Appendix A
Number (FF2),
assigned numbers for all ports.
Appendix B
Page Intro-20
ON/OFF PROG
ON/OFF PROG
"BSSC" (Ext./Trunk Port)
...press
ON/OFF CONF 90
...enter the Ext.No. to display the BSSC position:
...press again to exit.
ON/OFF
...press
ON/OFF CONF 91
...enter the Trunk No. to display the BSSC position:
...press again to exit.
ON/OFF
*59
for Extension Port Confirm
*60
for Trunk Port Confirm
and press the BLK-UP or BLK-DOWN one-touch key to check the
•
DBS 576 (USA) issued January 1999
NNNN
**
PROG
**
to display this screen:
to display this screen:
Extension Number (FF3)
Section 400: Programming
Position
Enter EXT.#
105 -EX 105
Port-No.: BSSC
105 -EX 105
Enter TRK#
105 -EX 105
Port-No.: BSSC
105 -EX 105
or
Trunk
576-20-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B