Main Transformer (T1) Voltage Test - Lincoln Electric IDEALARC SVM 122-A Service Manual

F-21
Service and repair should be performed by only Lincoln Electric factory trained personnel.
Unauthorized repairs performed on this equipment may result in danger to the technician or
machine operator and will invalidate your factory warranty. For your safety and to avoid elec-
trical shock, please observe all safety notes and precautions detailed throughout this man-
ual.
If for any reason you do not understand the test procedures or are unable to perform the
test/repairs safely, contact the Lincoln Electric Service Department for electrical trou-
bleshooting assistance before you proceed. Call 216-383-2531 or 1-800-833-9353 (WELD).
DESCRIPTION
This test will determine if the correct voltages are being applied to the primary windings of
the Main Transformer (T1) and induced on the secondary winding, auxiliary windings, and
phase angle windings.
MATERIALS NEEDED
Volt/Ohmmeter (Multimeter)
5/16" Nut driver
IDEALARC DC-400 Wiring Diagram (See Electrical Diagrams section of Manual.)
TROUBLESHOOTING & REPAIR

MAIN TRANSFORMER (T1) VOLTAGE TEST

WARNING
IDEALARC DC-400
LINCOLN
®
ELECTRIC
F-21