GE DVMRe CT II User Manual page 46

One or more of these
fields must be set to
ENABLE to receive an
email notification of
the selected event.
NOTE
Only if Notify Alarm is set to enable will the email include a link to the video on the disk.
The link pertains only to the alarm start. For more information see section 6.2.
Email Address Format
The format of the email addresses should be entered as follows. If the email address to be notified is
john.doe@somecompany.com, then john.doe should be entered in one of the Email User fields and
somecompany.com should be entered in the subsequent Email Domain field.
TCP/IP Notification Setup
This screen allows the user to setup the types of events to be notified of, and the IP addresses (up to
two) of the PC(s) where the WaveReader software resides.
WaveReader must be running on the receiving PC(s) and Alarm Monitoring must be setup. See Alarm
Monitoring in the WaveReader Manual for details.
0150-0313B
Notify Vidloss: ENABLE
Notify Record: DISABLE
Notify Menu Access: DISABLE
Notify Connection: DISABLE
Email User 1: john.doe
Email Domain 1: somecompany.com
Email User 2: jane.doe
Email Domain 2: somecompany.com
Local User: jim.doe
Local Domain: somecompany.com
SMTP Server: 0.
Format of email address: user@domain
Warning: Region/Time Zone must be set correctly!
46
Email Notification Setup
Notify Alarm:
Notify Archive:
Notify Power Up
SMTP Port:
0. 0. 0
[CANCEL] [OK]
DISABLE
DISABLE
DISABLE
25
DVMRe CT II