Mounting The Sensor - Urban Green Energy UGE Operation Manual

MOUNTING THE SENSOR

Important Notes:
On the edge of wind direction sensor, there are four alphabet letter of ―N‖,‖E‖,‖S‖ and ―W‖
representing the directions North, East, South and West. Wind direction sensor has to be adjusted
so that the directions on the sensor are matched with your real location. Permanent wind direction
error will be introduced when the wind direction sensor is not orientated correctly during
installation.
Wind speed sensor wire has to be inserted into the phone jacket on wind direction sensor. Wind
direction sensor wire has to be inserted into the phone jacket located on the thermo-hygro sensor
with marking of ―Wind‖ on top.
The rain sensor wire has to be inserted into the phone jacket located on the thermo-hygro sensor
with marking of ―Rain‖ on top.
7