Reset To Factory Default Settings; Pc Connection; Data Storage; Data Recall - Urban Green Energy UGE Operation Manual

section area (History data saving interval can only be changed using the PC software that comes with
this product, the default history data saving time interval is preset to 30 minutes prior to shipment).
2) Press the HISTORY key again will trigger the memory clear procedure: the word of ―CLEAR‖ will
be flashing; the full memory usage icon will be flashing. Hold the ENTER key for 3 seconds will clear
the memory.

RESET TO FACTORY DEFAULT SETTINGS

While in normal display, press and hold the UP/+ key for 20seconds to reset all settings to the
manufacturer default settings.

PC CONNECTION

As an important feature in addition to the display, the Weather Station allows the read-
out of all measured and displayed time and weather data in form of complete history
data sets on a PC.

DATA STORAGE

For a comprehensive weather history, the Base Station allows the internal storage of up to 4080
complete sets of weather data with time and date. The base station will lose all weather data if an
interruption of power supply. In case the memory capacity of the Weather Station is exhausted the
oldest data sets stored will be overwritten by the new ones entered.

DATA RECALL

Certain weather data or setting values can only be read out, processed, and displayed by means of a
PC. Also the settings of the storing intervals from 5 minutes to 240 minutes for the storage of data
sets can only be performed by means of a PC.

CONNECTIONS AND SOFTWARE

Weather Station and PC are connected via a USB cable. The EasyWeather software package, also
included in the shipping contents, must be installed on the PC.
This software allows the display of all present weather data with graphic symbols. It also allows the
display, storage, and printing of history data sets, whose volume exceeding the maximum 4080 data
sets of the Weather Station is only limited by the capacity of the PC's main memory.

PC SOFTWARE INSTALLATION

Installation of software is very simple: double click the setup.exe file and follow the steps.
Make sure you are running the program under the administrator accounts of your windows PC
platform. Otherwise the graphic function might not be working when graph display mode is needed
to display all history data.
16