Easyweather Pc Software User Manual; General Information; System Requirements; Installation Of The -Easyweather‖ Software - Urban Green Energy UGE Operation Manual

EASYWEATHER PC SOFTWARE USER MANUAL

1. GENERAL INFORMATION

This Weather Station is a high quality, easy to use weather monitoring system which reads, displays
and records the weather data from internal as well as external sensors. Besides the internally
measured values for indoor temperature, indoor humidity and air pressure the outdoor sensor will
take data for temperature and humidity, wind and rainfall. Operation of these units is by wireless
transmission to the Base Station.
After installing the ―EasyWeather‖ program on this CD-ROM, your PC can display all indoor data as
well as the weather data from the Base Station received from the external sensors. For operation,
simply use the USB cable supplied and connect the Base Station to the PC. From now on you can
start to track current and history weather information at your finger tips.

2. SYSTEM REQUIREMENTS

To install the "EasyWeather" software onto your PC, the minimum requirements are as follows:
Operating System: Windows NT4 (Service Pack >= 6a), Windows 2000, Windows XP, Windows
Vista, Windows 7.
Internet Explorer 6.0 or above
Processor: Pentium III 500 MHz or above
Memory: at least 128MB, 256MB recommended
CD-ROM Drive
Base Station and PC must be connected by USB cable
3. INSTALLATION OF THE ―EASYWEATHER‖ SOFTWARE
Firstly, the Base Station and the Outdoor Sensors should be connected and checked for correct
function (see Operation Manual for setting up the Weather Station). After successful checking,
install the ―EasyWeather‖ software as follows:
1. Switch on your PC and insert the CD-ROM into the CD-ROM Drive.
2. Double click ―Setup.exe‖
3. Select the installation process language option and click next
4. Click next and select the destination folder (change directory when needed)
5. Click next and the software will be installed automatically
6. Press ok to finish the installation process
7. From ―Start—All Programs—EasyWeather‖ path and double click the ―EasyWeather‖ icon to start
Application
.
Note: The graphic function needs the software to be installed under the administrator account. If it
is installed under limited user accounts, the graphic function of the software might not be working
correctly.
4. BASIC SETTINGS OF THE ―EASYWEATHER‖ SOFTWARE
After the ―EasyWeather.exe‖ program has been started, the following main window will appear on
the PC screen:
21