Weather Forecast Tendency - Urban Green Energy UGE Operation Manual

- Press the MENU key the fifth time to select the PRESSURE section, PRESSURE section digits will
start flashing. Enter the pressure display mode (relative and absolute pressure. Default absolute
pressure), press the UP/+ or DOWN/- key to select the display.
- Press ENTER key to select the following modes, then press the UP/+ or DOWN/- key to select
the display or set the value:

Select pressure unit between hPa, mmHg, inHg. (Default hPa).

The relative pressure setting. (If select absolute pressure display, skip this step)

The pressure high alarm setting. Press the ON/OFF key to on/off the alarm. If alarm is
enabled, an alarm symbol
enabled

The pressure low alarm setting. Press the ON/OFF key to on/off the alarm. If alarm is
enabled, an alarm symbol
enabled

Reset the maximum pressure value. When both the pressure value and MAX icon are
flashing, hold the ENTER key for 3s, the maximum pressure value will be reset to current
reading.

Reset the minimum pressure value. When both the pressure value and MIN icon are flashing,
hold the ENTER key for 3s, the minimum pressure value will be reset to current reading.
Pressure history bar graph
Press the MENU key the sixth time to select the PRESS HISTORY section, PRESSURE HISTORY
section digit will start flashing. Press the UP/+ or DOWN/- key to select the bar graph time scale
between 12hrs and 24 hrs for pressure history.

WEATHER FORECAST TENDENCY

- Press the MENU key the seventh time to select the TENDENCY section, TENDENCY section
digits will start flashing. Enter the weather forecast tendency display mode (SUNNY, PARTLY
CLOUDY and CLOUDY, RAINY/SNOW icon), press the UP/+ or DOWN/- key to select the
display.
- Press ENTER key to select the following modes, then press the UP/+ or DOWN/- key to select
the display or set the value:

Set the pressure threshold from 2-4hPa(default 2hPa)

Set the storm threshold from 3-9hPa(default 4hPa)
appears in the display indicating the alarm function has been
appears in the display indicating the alarm function has been
13