Specifications - Urban Green Energy UGE Operation Manual

SPECIFICATIONS

Outdoor data
Transmission distance in open field :
Frequency :
Temperature range :
Accuracy :
Resolution :
Measuring range rel. humidity :
Accuracy :
Rain volume display :
Accuracy :
Resolution :
Wind speed :
Accuracy:
Measuring interval thermo-hygro sensor:
Water proof level :
Indoor data
Measuring interval pressure / temperature :
Indoor temperature range :
Resolution :
Measuring range rel. humidity :
Resolution :
Measuring range air pressure :
Accuracy :
Resolution :
Alarm duration :
Power consumption
Base station :
Remote sensor :
Battery life :
Remark:
Where outdoor temperature is lower than -20° C make sure proper type of batteries to be used to
assure that the device can get enough power to maintain its function properly. Normal alkaline
batteries is not allow to be used since when outdoor temperature is lower than -20 °C the battery's
discharging capability is greatly reduced.
100m(300 feet)
433MHz
-40° C--65° C (-40℉ to +149℉)
+ / - 1 ° C
0.1° C
10%～99%
+/- 5%
0 – 9999mm (show --- if outside range)
+ / - 10%
0.3mm (if rain volume < 1000mm) 1mm (if rain
volume > 1000mm)
0-160km/h (0~100mph) (show --- if outside
range)
+/- 1m/s (wind speed< 10m/s), +/-10% (wind
speed > 10m/s)
48 sec
IPX3
48 sec
0° C--50° C (32° F to + 122° F) (show --- if outside
range)
0.1° C
10%～99%
1%
300-1100hPa (8.85-32.5inHg)
+/-3hpa under 700-1100hPa
0.1hPa (0.01inHg)
120 sec
2XAA 1.5V LR6 Alkaline batteries
2xAA 1.5V LR6 Alkaline batteries
Minimum 12 months for base station, Minimum
24 months for thermo-hygro sensor
19