Rear Panel; Series - Dahua 32 Series Quick Start Manual

Enter
ENTER
Assistant
Fn
Record
REC
Window switch
Mult
Shuttle(outer
ring)
Jog(inner dial)
USB port
Record light
1-16
Remote control
ACT
indication light
Status indication
Status
light
Power indication
PWR
light
IR Receiver
IR

1.6 Rear Panel

1.6.1 32 Series

The rear panel is shown as below. See Figure 1-3.
Confirm current operation
Go to default button
Go to menu
One-window monitor mode, click this button to display
assistant function: PTZ control and image color.
Backspace function: in numeral control or text control, press
it for 1.5 seconds to delete the previous character before
the cursor.
In motion detection setup, working with Fn and direction
keys to realize setup.
In text mode, click it to switch between numeral, English
character (small/capitalized) and etc.
In HDD management interface, you can click it to switch
HDD record information and other information (Menu
prompt)
Realize other special functions.
Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Click it to switch one-window/multiple-window.
In real-time monitor mode it works as left/right direction key.
In playback mode, counter clockwise to forward and clock
wise to backward.
Up/down direction key.
Playback mode, turn the inner dial to realized frame by
frame playback. (Only applies to some special versions.)
To connect USB storage device, USB mouse, burner and etc.
For 4/8/16 channel device: indication light on means that the
channel is in recording.
Remote control indication light
If there is Fn indication light, current status indication light is null.
Power indication light
It is to receive the signal from the remote control.
6