Advanced-Hdd Management; System Setting-Alarm - Dahua 32 Series Quick Start Manual

Here is a sheet for you reference.
Name Function
key
Zoom
Focus
Iris
You can click set button in Figure 3-6 (or click REC button in the front panel) to set preset, tour, and
pattern.
You can click page switch button in Figure 3-6 (or click Fn button in the front panel) to call main function.

3.5 Advanced-HDD Management

Here is for you to view and implement hard disk management (main menu->Advanced->HDD
management). See Figure 3-8.
You can see current HDD type, status, capacity and record time. The operation includes format HDD,
resume from error or change HDD property (Read/write HDD, read-only HDD). It can also set the HDD
alarm and HDD specified storage setup.

3.6 System Setting-Alarm

Before the operation, please make sure you have properly connected the alarm devices.
Alarm interface is shown as below. See Figure 3-9.
Alarm in: Here is for you to select channel number.
Event type: There are two types. One is local input and the other is network input.
Figure 3-7
function Shortcut
key
Near ►
Near
close
Figure 3-8
Function function
key
Far
Far
Open
Shortcut
Key
►
18