ENGLISH
30
4
Remove the shavings heads from the shaving head
holder and throw them away.
5
Place new shaving heads in the holder.
Note: Make sure the projections of the shaving heads fit
exactly into the recesses.
6
Place the retaining ring holder on the retaining
ring (1), place it on the shaving head (2) and turn it
clockwise (3) to reattach the retaining ring.
Repeat this process for the other retaining rings.
7
Reattach the shaving head holder to the bottom part
of the shaving unit.
8
To reset the shaver, press and hold the on/off button
for approx. 7 seconds. Wait until you hear two beeps.
Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service. or go to your Philips
dealer. You can also contact the Philips Consumer Care
Centre in your country (see the worldwide guarantee
leaflet for contact details).