ROBBE BUSSARD river survey boat 1196 Building Instructions

ROBBE BUSSARD river survey boat 1196 Building Instructions

Advertisement

Building Instructions
River survey boat
BUSSARD
No. 1196

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BUSSARD river survey boat 1196 and is the answer not in the manual?

Questions and answers

Summary of Contents for ROBBE BUSSARD river survey boat 1196

  • Page 1 Building Instructions River survey boat BUSSARD No. 1196...
  • Page 2: Table Of Contents

    Introduction to the building instructions tions The building instructions are divided into sub-assemblies, Adhesives: each of which is sub-divided into individual stages arranged in robbe Speed Type 1 No. 5062 Recommended accessories: a logical sequence. Radio control system: Each stage also includes supplementary hints and tips which robbe Speed extra-thick No.
  • Page 3 • If several modellers are using the same stretch of water, ensure Liability exclusion: that your frequency is not already in use before switching your robbe Modellsport is unable to ensure that you observe the assembly Boat propellers, and all moving parts generally, constitu- radio on.
  • Page 4: Checking The Working Systems

    - From time to time it is advisable to grease the propeller swapping over the wires between motor and speed Painting the model shaft: loosen the shaft and withdraw it. Apply robbe preci- - Silver RAL9006 controller (e.g. if you are using components other than sion grease to the stern tube, then re-fit the propeller shaft.
  • Page 5 Building Instructions - BUSSARD river survey boat No. 1196 Parts List - BUSSARD river survey boat Stage Number Component Description Quantity C 19 Pushrod / Rudder / Propeller Fender Bollard C15-B Anchor CWL = Waterline C15-A Anchor C10-B Hatch cover C10-A Hatch cover Anchor winch...
  • Page 6: Stage 1 - Installing The Rudder And Propeller Systems

    Building Instructions - BUSSARD river survey boat No. 1196 Stage 1 – Installing the rudder and propeller systems Fig. 1 Install the rudder servo in the stern of the boat as shown in the illus- tration. Fig. 2 Insert the rudders in the bushes (already fitted in the hull) from the underside.
  • Page 7: Stage 2 - Deck

    Building Instructions - BUSSARD river survey boat No. 1196 Stage 2 – Deck C06-A Glue all parts in place as shown. C04-A Position the hatch covers C10-A and C10-B in such a way that the anchor winch motor C09 is not obstructed. C06-C C03-B C15-A...
  • Page 8: Stage 3 - Superstructure

    Building Instructions - BUSSARD river survey boat No. 1196 Stage 3 – Superstructure Parts List - Stage 3 You may need to run a drill carefully through the holes for the dummy Number Component Description Quantity lamps, and shorten the lamp spigots to suit. C01-E C14-C Ventilator flap...
  • Page 9: Stage 4 - Superstructure

    Building Instructions - BUSSARD river survey boat No. 1196 Stage 4 – Superstructure Parts List - Stage 4 Number Component Description Quantity C14-C Ventilator flap Lifebelt C05-B Ventilator Decal sheet C05-B C14-C Please also refer to the photos on pages 11 - 12 to determine the exact positions.
  • Page 10: Tam Gold-Contact Socket, Pack Of

    Building Instructions - BUSSARD river survey boat No. 1196 Wiring diagram - BUSSARD river survey boat Receiver Make up Y-lead for battery connection / charging: 1 x TAM gold-contact socket, pack of 5 No. 4060 1 x TAM gold-contact plug, pack of 5 No.
  • Page 11 Building Instructions - BUSSARD river survey boat No. 1196...
  • Page 12 Modellsport Beteiligungs GmbH Gießen / HRB 5793 · Managing Director: E. Dörr Errors and technical modifications reserved. - Copyright robbe-Modellsport 2013 Duplication and copying of the text, in whole or in part, is only permitted with the prior written approval of robbe-Modellsport GmbH & Co. KG...

Table of Contents