Simrad AP28 Operator's Manual page 92

Return to the Installation menu item 'Automatic steering'
if you want to adjust the steering parameters. See below
for information.
Automatic steering
The Automatic steering menu contains steering
parameters for course steering, wind steering and nav
steering.
Recall autotuned
To recall the parameter values that were achieved during
the Autotune procedure, select Recall autotuned under
'Automatic Steering', and press the
Confirm by pressing the
Steer to compass
The steering parameters can be looked at and changed if
needed under this menu item. The parameters are
divided into two sets (page 23):
•
92 | Setup at installation
HI value parameters for automatic steering at low
speed and when running with a sailboat
1
key.
softkey.