REAR AXLE AND REAR AXLE HUB
CHECKING THE REAR AXLE
1. Check:
• rear axle runout
Do not attempt to straighten a bent axle.
CHECKING THE DRIVEN SPROCKET
1. Check:
• driven sprocket
CHECKING THE BRAKE DISC
1. Check:
• brake disc
2. Measure:
• brake disc deflection
• brake disc thickness
INSTALLING THE DRIVEN SPROCKET
1. Install:
• driven sprocket
TIP
Make sure that the blunt-edged corner
the driven sprocket is facing outward.
a
6 - 14
a
Out of specification → Replace.
WARNING
Rear axle runout limit
1.5 mm (0.06 in)
Refer to "REAR SHOCK ABSORBER,
SWINGARM AND DRIVE CHAIN".
Galling/damage → Replace.
Out of specification → Replace.
Brake disc maximum deflection
0.15 mm (0.006 in)
Out of specification → Replace.
Brake disc minimum thickness
3 mm (0.12 in)
CHAS
of