2
2
1
a
CHECKING THE SLIDER
1.
Check:
slider
1
Damage/wear
EAS00322
CHECKING THE SECONDARY SHEAVE
1
1. Check:
secondary fixed sheave
secondary sliding sheave
Cracks/damage/wear
ondary fixed and sliding sheaves as a set.
2. Check:
torque cam groove
Damage/wear
fixed and sliding sheaves as a set.
3. Check:
guide pin
Damage/wear
fixed and sliding sheaves as a set.
4. Measure:
Compression spring free length
Out of specification
5. Measure:
Clutch housing internal diameter
Out of specification
4 - 39
ENG
BELT DRIVE
1
Replace
1
Replace the sec-
1
Replace the secondary
2
Replace the secondary
Replace.
Compression spring free length
87.9 mm (3.46 in)
<Limit>: 82.6 mm (3.25 in)
Replace.
Clutch housing internal diameter
107.0 mm (4.21in)
<Limit>: 107.5 mm (4.23 in)
2
a